MARINE - Ultrasonic Antifouling

2CH Antifouling System	4CH Antifouling System

DESIGNED AND MADE IN AUSTRALIA
Designed, developed and manufactured in Australia. Australian ingenuity and quality.

LIMITED OFFER:  FREE UPGRADE TO FREE SHIPPING

FOR THE 2 AND 4 CHANNEL ANTIFOULING UNITS

Protect your boat against barnacle and algae growth with the SOANAR Ultrasonic Antifouling System

2-Channel and 4-Channel antifouling systems available, suitable for boats of up to 14m/45ft or 20m/65ft.

FEATURE POINTS
• Helps keep the hull of your boat clean and free from most marine growth
• Reduces drag and increases your fuel economy
• Frequency of slipping for antifouling treatment is reduced enormously
• Typically cheaper than a slip, clean and antifouling paint job
• Safe for the environment, no harsh chemicals involved

HOW THE SOANAR ULTRASONIC ANTIFOULING SYSTEM WORKS

Inside the main control box is a specially programmed microprocessor which centrally controls the system, sending out a range of ultrasonic pulses with varying frequencies to the external transducer units. These transducers are attached with epoxy to the inside of the vessel’s hull, transferring the ultrasonic pulses directly into the hull. The hull then vibrates in tune with the ultrasonic wave pulse, making for a rather hostile and unpleasant environment for the marine growth. Indeed, it would be like trying to go to bed in the front row of a heavy metal concert!

You generally do not need to have the boat out of the water for installation. The transducer is installed on the inside of the hull

The ultrasonic pulses are outside the range of human hearing, and are attenuated after about 10 metres through water. If your boat is in a pen the boats each side may partially benefit from reduced growth as well!

Power is supplied by 12VDC, making wiring installation easy. A low voltage cut-out feature is also included, which protects the boat’s batteries from being over discharged. As you can see by the technical specifications table, this unit could flatten your battery bank given enough time with no recharging. It is ideal if your boat is in a pen with AC shore power constantly charging your batteries. If you are on a mooring without shore power, we strongly recommend wind or solar charging.

>>> Download INSTALLATION MANUAL